Tuesday 27 November 2012

Brother LC980 ink cartidges support

Using Jet Tec compatible ink cartridges for Brother printers.
Q. My cartridge doesn’t fit the printer the same as the original.
A. Before installing your compatible cartridge, you must remove the red sealing clip by ‘snapping’ it off.
Q. I have installed my compatible cartridge correctly but the printer cannot detect it.
A. Remove the cartridge from the printer, push the reflector on the cartridge up until it clicks into position. Reinstall the cartridge slowly.
Q. I have installed my compatible cartridge correctly but the printer says it cannot print as the cartridge doesn’t have enough ink to maintain print quality.
A. If you have installed a full cartridge and the replace ink message appears, you should follow the instructions below: 1. Remove the cartridge from the printer. 2. Push reflector up as shown before installing the cartridge into the printer. 3. Tilt the cartridge forward to allow the front chamber to fill with ink. 4. Reinstall the cartridge in the printer, slowly.
You can buy Jet Tec ink cartridges for Brother printers here:
  • Brother LC980 black ink cartridges
  • Brother LC980 cyan ink cartridges
  • Brother LC980 magenta ink cartridges
  • Brother LC980 yellow ink cartridges

  • UK Ink Supplies of Lincolnshire - official Jet Tec retailer in Lincoln.
    This blog is by UK Ink Supplies of Lincoln, UK - stocking a wide range of Jet Tec printer cartridges and Jet Tec laser toner cartridges for many models of printers.  For more information please visit Jet Tec printer cartridges for the latest Jet Tec ink cartridges and Jet Tec laser cartridges for Canon, Epson, HP, Lexmark, Brother, Dell, Oki, Xerox and Kodak printer products.
    Bookmark and Share

    No comments:

    Post a Comment